2005 Rocky Mountain Flow F1.0 MTB frame made from Rocky Mountain’s custom Rad Taperwall butted 7005 aluminium tubing 16.5″ from centre of bottom bracket to top of seat tube 21.5″ reach from centre of seat tube to centre of head tube 110mm long head tube. Fits 1 1/8 external cup headset 73mm threaded bottom bracket shell 135mm rear axle spacing I. Disc tab mounts 26 disc wheels only 31.8mm front derailleur 27.2mm seatpost 32mm seat clamp in good condition, no dents or cracks, some chain suck to the drive side chain stay, clear coat also scuffed on top tube please study the pictures as I’ve tried my best to show all defects will make a very good hardcore hardtail.

Circa 2005 Rocky Mountain Flow F1.0 frame. Made from Easton RAD Taperwall alloy tubing. 16.5 from centre of bottom bracket to top of seat tube. 21.5 from centre of seat tube to centre of head tube. Standard 135mm wide drop outs. Standard BSA threaded bottom bracket (68mm). Standard head tube for straight 1&1/8 fork steerer and external cup headsets. The usual marks from use chain suck, stone chips, cable rub etc.. The paint is quite flat on the top tube where an externally routed droppers cable was zip tied to it. Overall it still looks great for the age. No dents or cracks whatsoever. Great trail bike or dirt jumper.

Nice frame bit of cosmetic damage scratches paint chips etc but no dents or serious scrapes, little bit on the weighty side but built to last. Was a project build of mine but ended up being a bit too small for me! Takes 26″ disc wheels 27.2 seat post 1 1/8″ forks. Could do with a clean before use but good used working condition no faults found when checking the item over. Grab a bargain and please check out my other listings. Will Be Sent 2nd Class Standard/ParcelForce48 Unless Requested Otherwise.