Intense Spider 29 aluminium frame in Medium, hand-built in California. Classic VPP suspension design with adjustable rear travel via shock mounting positions. This is a well-maintained frame that’s been in storage for the last year. Seat tube: approx. Rear axle: 142 x 12 mm included. Bottom bracket: 73 mm threaded (XTR BB included). Headset: Cane Creek (used, but still has life left). Seatpost: 31.6 mm Includes seat clamp. Front mech compatible and I have a matching XT mech if required. Non Boost spacing. Shock: Fox Float RP23 (aftermarket upgrade) with fresh Burgtec bushings fitted. Size: 190 x 57 mm (7.5″ x 2.25″). Rear travel: approx. 100-120 mm adjustable (via mounting positions). Shock holds air and all adjustments were working correctly when last built. Serviced prior to approx. 100 hours of light use. Structurally sound – no cracks, one small rock strike dent in lower downtube. Cosmetic marks from normal use (see photos). Linkage bearings are in good usable condition. New Burgtec shock bushings fitted. Heavy-duty brass shock hardware installed. Lower link has been freshly greased via zerk ports. Frame has been hung in the garage for around a year, so may need a few cycles to get back to its best. Matching RockShox Reverb dropper available in separate listing.

Intense socom FRO frame. Size large (5.25 headtube length). Just reassembled with new bearings. Usual paint scuffs, a lot will polish out. No cracks or dents. Does have a small repair to top chainguide tab- you can’t see it at all once one is fitted and it works as it should. Straight 1.5 headtube 150mm rear end See last pic for catalogue showing geometry and suggested build spec. I don’t post uninsured.

Intense 951 Racing Fro downhill frame in astonishing green colour, 26″, small size 15″, fox dhx rc4 rear shock, cane creek 1 1/8 headset (non tapered), 12x148mm rear axle (boost), wtb volt saddle, Crankbrothers cobalt 2 seat post, hope clamp, shimano saint bottom bracket, rockguard protection under the frame, invisible film protection on the top of the frame, G3 dropouts (which lets you adjust the geometry between three dropout positions), VPP technology (Virtual Pivot Point, a popular mountain bike suspension design that uses two short, counter-rotating links to create a single virtual pivot point that moves through the suspension travel) same as Santa Cruz. The frame shows some signs of use but great working condition.

It rides so nice, really plush on the descents but with good support in the travels, and pedals surprisingly well up the hills. My trails here are a mix of long steady climbs or short punchy climbs with plenty of rocks, it certainly handles these. As well as it is on the climbs, this bike comes alive on the descents! It corners amazing, it can handle chop and rough rocks with ease but it is still easy to lift up on mini lips, jumps and into manuals. The shock is a 2024 Fox Float X2, it was upgraded to the latest iteration after the original blew. The new one has been great now for around 18 months. Frame comes with seat post collar, internal storage bag and a clever qr thru axle, and obvs the shock. It’s a full 29er, so big wheels front and back Frame has been wrapped since new so is I’m good condition. Only a couple of stone chips and a rub on the chain stay from my heel I wish I could keep it as well as getting a trail bike, but I don’t have the space and as my riding has changed, it’s gotta go unfortunately. Any questions just ask Again, this is FRAME ONLY.

Intense 29r carbine size Large. Usual marks as you would expect from a used frame. Invista frame protected from new. Most of the marks are in the coating, it’s Matt paint underneath. Should be pretty pristine. Upgraded machine FRO pivot bolts. Lightweight all mountain slayer of a frame. Takes 200x 57 mm shock. 142mm bolt through rear axle. Suits upto 6ft 1 rider. Has sram gxp collar. Can be used with shimano without. Will include touch up paint for the orange paint nearest I could find. If you want more pics please ask. Needs new bearings in lower pivots. Works fine but I don’t have grease gun to Inject grease. Small rub to carbon from plastic bottle see image under usa sticker.

Used intense Uzzi sl 5.5 inch travel with lower travel setting if needed. 18.5 frame centre to top. Adjustable seat tower angle. Rear triangle has been painted was silver could easy be stripped back. Rebound on fox shock is not working, shock works fine it’s just really fast. Will need service to fix.

For sale is my intense tracer 275 alloy frame with cane Creek double barrel shock and 450 x 2.25 spring. It’s a few years old now but rides amazingly. Yes it has paint defects and a bit of cable rub but it’s to be expected of a bike like this. The shock really turned this bike up to 11! I’m letting it go for less than the cost of the shock itself. No dents or cracks anywhere and it’s the last of the genuine made in USA frames. Get a legendary intense now and rule the trails!

Fox float factory x2. Upgrade rear qr Intense axle. Including spare hanger and cable grommets. Fantastic condition, very well looked after, 95% ridden southdowns /surrey hills area. Not jumped or abused, use as trail bike. Originally brought as frame and built up.

Intense Primer SL size XL carbon 29 full suspension mountain bike frame. I believe this is a 2018 model. Fox DPS Factory shock. Adjustable 130 or 115mm rear travel. 148x12mm rear rear axle. Chris King headset also included. Pivot bearings are brand new. Shock serviced last year. Some paint chips as shown in photos. This item is in the category “Sporting Goods\Cycling\Bike Frames”. The seller is “ellsell11″ and is located in this country: GB. This item can be shipped to United Kingdom.

• Brand: Intense
• Compatible Bike Type: Mountain Bike
• Material: Carbon
• Wheel Size: 29 in
• Set Includes: Headset
• Part Type: Bicycle Frame
• Frame Size: X-Large

INTENSE 6.6 SS Slopestyle Full Suspension Mountain Bike Frame. These don’t come up very often on here. No dents or cracks. Seat Tube = 16.5 (415 mm) Centre to Top. Top Tube = 22.75 (575 mm) Centre to Centre measured along length of tube. Accepts 1 1/8 Straight Steerer forks. Weight = 3075g/6.78lb (including functional FSA headset). For 26 Disc Wheels. No shock but shock hardware included. Loose bottle cage boss as shown on last photo. This item is in the category “Sporting Goods\Cycling\Bike Frames”. The seller is “granniegear” and is located in this country: GB. This item can be shipped to all countries in Europe, Australia, New Zealand.

• Wheel Size: 26 in
• Colour: Polished
• Material: Aluminium
• Frame Size: 16\
• Part Type: Bicycle Frame
• Compatible Bike Type: Mountain Bike
• Component Type: Frames
• Suspension: Suspension
• period: Retro
• Configuration: Frame Only
• Brand: Intense