Please message us if you are uncertain. Carbon Fibre eMTB Kit – Frame, motor and battery (Important note – this advert is NOT for a complete bike). Frame size: 19 – suits riders with 31 inch inside leg or more. Frame will accommodate the following wheel configurations: Front – 29″ Rear – 29″ Front – 27.5″ Rear – 27.5″ Front – 29″ Rear – 27.5″‘Mullet configuration’ Kit comprises Carbon Fibre full suspension frame, Bafang M510 motor, Bafang BT F03 450wh battery, all necessary wiring, speed sensor, controller and display. The finished bike pictures are to show you fully built bikes. Please note this kit is not a fully built bike. The frame comes primed and painted in matte black. The frame will need light sanding and prepping for paint then you can paint the frame any colour you choose. Frame geometry measured when using’mullet configuration’ wheels: Stack : 633mm Reach : 468mm Chainstay : 460mm Head Angle : 62.5 degrees Standover Height : 836mm Bottom Bracket Height : 350mm Effective Seat Tube Angle : 77 degrees. Rear Shock Size :185mm x 55mm. Motor power = 250w Motor effective torque = 95Nm Motor peak torque = 130Nm Battery range = up to 75km. Finished bike weight can be as low as 21.5kg. The green and platinum coloured example in pictures weighs 21.5kg. The grey and pink example pictured weighs 21.9kg because it features the heavier’Rockshox ZEB’ forks The above weight examples were achieved using Novatec Carbon Fibre Wheelsets.